Гидроабразивная резка
WATERJET CORPORATION SUPREMA DX 44
 |
|
|---|
The I.T.C™ System manages to produce straight walls at the fastest cutting speed: in fact, the CNC automatically compensates the inclination (up to 2°) and the orientation of the jet of water to eliminate the tapering effect. This ensures a high quality part at a low cost.
During I.T.C™compensation, the Jet is also directed towards the piece in order to reduce the Tail Delay effect and the acceleration-deceleration ramp times in the corners, for faster and cheaper cutting cycles.
The WaterCad-Cam™ Software generates the I.T.C™ Program automatically just through a few Clicks.
| Net cutting area | x | 1250 mm | 4' |
| y | 1250 mm | 4' | |
| z | 170 mm | 7' | |
| Rapid speed | 0 -:- 20 mt/min | 0 -:- 67' / min | |
| osition Accuracy Repeatibility Ball Bar (300 mm diameter) |
+/- 0,10 mm | +/- 0,004' | |
Kmt streamline™ pump 30 - 50
High pressure 4.130 Bar
High-Pressure Waterjet Pump System with two synchronized mono-intensifiers without accumulator
| Model | Model | Water Consumption | Orifice Size |
| S 30 | 30 HP - 22 KW | 2,8 lt/min - 0,7 gal/min | 0,25 mm - 0,010’’ |
| S 50 | 50 HP - 37 KW | 3,8 lt/min - 0,9 gal/min | 0,35 mm - 0,014’’ |
- Ceramic Plungers
- Electronic Pressure Control
- Working Pressure: 4.000 Bar = 58.000 PSI
- Design Pressure: 4.130 Bar = 60.000 PSI
- Attenuator
Streamline™ pump pro 60
Ultra h.p. technology 6.200 bar = 90.000 psi
High-Pressure Waterjet Pump System with two synchronized mono-intensifiers without accumulator
| Model | Model | Water Consumption | Orifice Size |
| PRO 90 | 60 HP - 45 KW | 2,5 lt/min - 0,61 gal/min | 0,25 mm - 0,010’’ |
Advantages
|
|
|
|
Special offers
