DESCRIPTION
Blade dia 500 mm to get very good cutting capabilities.
Full protection with complete cover and front automatic lowering closure.
Strong cast iron head.
Head powered double tilting from -45°/90°/22°30' by means of a direct current motor managed by a positioner.
Oleo-pneumatic blade advancement.
Clamps complete with high/low pressure safety device.
Chips ejection through the head.
Chips collection drawer.
Optional:
- Side tables 801/E, 801/D, 802/M, 802/F.
- LH loading tables 802/SX, 85400.
CONSTRUCTION FEATURES
 |
Full enclosure to provide noise reduction and complete accident protection. |
 |
Opening upper protection. |
 |
Electronic tilting of the head from -45° / 90° / 22°30'. |
 |
Electronic device to digitally set the cutting angle, complete with display. |
TECHNICAL FEATURES
| Blade motor power: |
2,2 kW |
| Maximum installed power: |
2,5 kW |
| Working pressure: |
6 ÷ 7 bar |
| Power supply: |
230 / 400 V - 50 ÷ 60 Hz |
| Blade motor revolutions: |
2800 rpm |
| Blade shaft diameter: |
30 mm |
| Blade diameter: |
500 mm |
| Degrees that can be carried out: |
-45°, 90°, 22°30' |
| Dimensions: |
915 x 1410 x 1500 mm |
| Weigth: |
450 Kg |
CUTS GRAPHIC
ELECTRONICS
Centesimal electronic positioner with 3 pre-set positions (45°/90°/-45°) and 5 more positions can be set by the user on any angle between 22,5° and -45°.
Possibility to store in memory machining cycles up to a maximum of 5 cuts.
Display showing the angle of the head.
